COMBIMASS GA-s hybrid
Gas Analyzer Station
The analyzer station COMBIMASS® GA-s hybrid can integrate all types of portable analyzer instruments of the COMBIMASS® GA-m/ GA-e series in combination with gas modules of the GA-s hybrid series. So COMBIMASS® GA-s hybrid analyzer system can even operate as a „2-in-1-solution“. A cheaper alternative could be the analyzer type GA-e, which cannot be used for portable measurements (but with same advantages regarding service and maintenance) because it doesn´t contain a battery and a pump.
Alternatively or additionally several single gas modules of the hybrid series, mounted on DIN-rails, can be used which cannot be fitted into a GA-m. This improves the flexibility regarding gases, analysis technologies and operation ranges. Gas circles can be built up parallel, so various gas streams can be analyzed at the same time and continuously. Beside typical IR-technology and electrochemical sensors even paramagnetic and heat conductivity sensors can be used too.
So a stationary analysis of oxygen for process control and safety (with a second parallel gas module incl. plausibility checks) becomes possible by using a paramagnetic cell as well as high hydrogen concentrations up to 30 Vol.-% can be analyzed by using a heat conductivity technology.
The pump and solenoid valves inside the cabinet enable a quasi-stationary analysis from different gas sampling points. If one sampling point is used only, also a stationary analysis with one set of gas modules is possible. Data and alarms can be stored internally or transferred to the main PLC using various standard interfaces. Further optional telecommunication modules can realize an external access to the data or can be used for functional tests and/ or maintenance diagnosis. An “alife”-signals can be sent via GSM/GPRS to a host server as an option. An uninterruptable power supply unit can keep analysis running and send out an alarm signal, even if normal power supply is interrupted.
Pressure and temperature of the inner cabinet and the gas streams are monitored. Additional modules for continuous control of operation and plausibility check can be supplied to increase manipulation-safety.
The gas cells and modules can be recalibrated in the cabinet. So long-time accuracy of analysis is kept at a high level. Beside manual calibration mode also an auto-calibration mode is available. A hardware key or a software version with password functionality can be used to lock configuration settings.
Special Features analyzer station COMBIMASS® GA-s hybrid
© Copyright 2023. All right Reserved.
Designed & Developed By Audience Planet